Adapts to Metal roof sheeting, Custom Orb, Trimdeck, Spandeck, Klip-Lok 700, Klip-Lok 500 and Concrete fix for the use of Free Fall Arrest Single Point Anchorage ( 15kN ).
Can be used as a static line system . CW, fastenings, owner’s manual and installers tag . Colour coded installation instructions on each anchor.
ALIGNS TO ROOF SCREW PATTERN AND PROFILE
INDUSTRY COMPLIANT AND CERTIFIED PRODUCTS
COMPLETE HEIGHT SAFETY SOLUTIONS
SIMPLE INSTALLATION METHOD
ADAPTS TO METAL ROOF SHEETING & CONCRETE
PERMANENT ANCHOR FIX
(min. grade sheet thickness 0.42mm) with 1 x Bulb-tite 7.7mm x 27mm RV6605-9-6W fixed in sequence as indicated below. To be installed and used by competent persons only.
USER INSPECTION & MAINTENANCE
It is a requirement that the roof anchor be inspected prior to each use, if any of the following are evident, the roof anchor must be removed from service immediately: Any defects, absent markings/ labelling, evidence of missing parts, or if the roof anchor has been used in a fall. Roof anchor not to be used in a corrosive environment. Temporary fix not to be used as a permanent anchor. Permanent anchor to be used in the direction of eyebolt only. Roof anchor to be used only where roof sheeting has been fully installed in accordance with manufacturers recommendations. Roof sheeting profile can vary up to 5mm, inspect roof sheeting prior to installation of roof anchor. Roof anchor to be cleaned regularly with a damp cloth.
Complies with: AS/NZS 1891.4: 2009 Single Point Anchorage (15Kn)
Complies with: AS/NZS 1891.2: Suppliment 1:2001 Static Line Use (15Kn)
By purchasing a PERMANENT ANKAme you are deemed to be a competent installer, or have contacted a competent installer, as the manufacturer and seller take no responsibility for the misuse of the products. Refer to owners manual installation instructions for the correct use of these items.